Yes. All three stages are fully passive. The sediment filter is a simple cartridge housing. The acid neutralizer uses a non-backwashing upflow valve that runs on water pressure alone. The carbon filter uses the same non-backwashing design. No outlets, no wiring, no control panels. Just plumb it inline between your pressure tank and the house.

If your main problems are low pH (acidic water) and taste or odor, yes. The 1.5 cubic foot tanks are sized for 1-3 bathroom homes with normal water usage. If you also have iron, hardness, or bacteria, you will need additional stages that require electricity and drain connections. Call Aidan at 800-460-5810 with your water test results and he will tell you exactly what you need.

This is the easiest system we sell to install. There is no programming, no drain line to run, and no electrical work. If you can connect basic plumbing fittings (PEX, copper, or PVC), you can do this in an afternoon. Aidan walks customers through it over the phone 7 days a week.

The sediment cartridge needs swapping every 3-6 months (5 minutes with the included wrench). Add calcite to the acid neutralizer every 12-18 months through the fillport. The carbon media lasts 3-5 years before needing replacement. No salt to buy. No backwash cycles. No UV lamp swaps.

This system does not treat iron or hardness. Those problems require backwashing filters and softeners that need electricity and a drain. If your water test shows iron above 0.3 ppm or hardness above 7 gpg, call us at 800-460-5810 and we will point you to the right package. We have systems for every combination of well water problems.

Buying all 3 stages together saves $360 compared to purchasing each system individually. Everything ships together, arrives at the same time, and is sized to work as a matched set. One order, one shipment, one expert to call.