Stops hard-water scale in your water heater, pipes and fixtures, with no salt, no drain and nothing to plug in. Sized for 4 to 7 people and 3 to 4 bathrooms.
2.5 cu ft | 14 L Watch Water Filtersorb SP3 | Clack C1190 Non-Electric Head | 13x54 Vortech Tank
Stops hard-water scale in your water heater, pipes and fixtures, with no salt, no drain and nothing to plug in. Sized for 4 to 7 people and 3 to 4 bathrooms.
2.5 cu ft | 14 L Watch Water Filtersorb SP3 | Clack C1190 Non-Electric Head | 13x54 Vortech Tank
Watch before you buy
3 videos from our YouTube channel, which has 1.8 million views
Is this the right system for your water?
It keeps hard water from scaling up your home. No salt, no drain, nothing to plug in.
Pick by how many people live in the house. If people and bathrooms point to different sizes, go by people.
At the top of a band, or if several showers often run at once, go one size up.
Hardness over 25 grains? Choose a salt softener instead.
The Large is a 13x54 tank with 14 liters of Filtersorb SP3, Aidan's double dose for this tank. It is the size most of our salt-free customers choose, and it fits a three or four bathroom house with four to seven people. It holds the most media of the three, 13 inches across and about 58 inches tall with the head.
The cu ft number is the tank size; the Filtersorb SP3 inside is measured in liters.
Not sure? Text your water report to Aidan at 443-277-2204.
The flow math behind the sizes
Watch Water, which makes Filtersorb SP3 in Germany, sizes its media by flow: its table works out to about 1.5 GPM per liter, so the 14 liters here are good for about 21 GPM. A modern shower head is rated 2.5 GPM or less, and two showers plus a faucet is about 6 GPM, so every size keeps up with the house. The bigger sizes hold more media for more people and more water through the years, which is why we size by household. The people and bathroom bands are ours, the same bands as our filter + salt-free systems.
Size
Tank
Filtersorb SP3
Flow (Watch Water)
Small 1.5
10x54
9 L
About 13 GPM
Medium 2.0
12x52
10 L
About 15 GPM
Large 2.5
13x54
14 L
About 21 GPM
Your water report may list hardness in mg/L: divide by 17.1 for grains per gallon.
Source: Watch Water, Filtersorb SP3 product specification (2025). People and bathroom bands are ours.
Aidan's honest answer: for most hard water homes, a salt softener is the better buy. It removes the hardness and costs less to run. This salt-free conditioner is the right pick when a softener does not fit.
Choose this if
No drain or electrical outlet where the water comes in
Clack C1190 non-electric head with bypass valve, 1 inch connections
14 liters of Watch Water Filtersorb SP3, packed separately
Fill funnel
Free freight shipping to the lower 48
Not in the box
Plumbing fittings (your plumber supplies them)
A drain line or electrical outlet (neither is needed)
Instructions: the makers include none. The Installation tab and our salt-free guide cover the steps, or text Aidan at 443-277-2204
The media ships separately because a filled tank is too heavy to ship safely. It pours in through the funnel at install.
Media
14 L Watch Water Filtersorb SP3 (Watch Water's maximum for a 13x54: 26.4 L)
Tank
Vortech 13x54 polyglass tank, no gravel (13 in across, 54 in tall)
Head
Clack C1190 non-electric in/out head with bypass valve, upflow
Flow
About 21 GPM (Watch Water's sizing)
Household
4 to 7 people, 3 to 4 bathrooms
Hardness
Up to 25 grains per gallon (Aidan)
Connections
1 inch male
Height with head
About 58 in
Electricity / drain
None / none
Pressure / temperature
20 to 125 PSI / 40 to 110 F, cold line only
Certifications
Clack head: NSF/ANSI/CAN 61 and 372 (NSF). SP3: NSF/ANSI/CAN 61 and 372 (IAPMO R&T). Materials safety, not scale reduction
Warranty
10-year tank, 5-year valve (manufacturer)
Does
Keeps hardness from forming scale
Protects the water heater, pipes and fixtures
Adds no salt or sodium
Does not
Soften (water still tests hard)
Remove chlorine, iron, lead or PFAS
Treat well water with iron or sulfur
Full water limits
SP3 limits (Watch Water): pH 6.5 to 9.5, iron under 0.5 ppm, manganese under 0.05 ppm, copper under 1.3 ppm, free chlorine under 3 ppm, no oil or hydrogen sulfide. Aidan's rule is stricter: no iron at all. On well water with iron or sulfur, start with an iron filter. SP3 is not certified for any specific contaminant reduction. If your toilet tanks collect grit, add a 20 inch Big Blue 5 micron sediment filter ahead of it.
Sources: Watch Water Filtersorb SP3 specification; IAPMO R&T listings W-16275 and W-16273.
1 to 2 hrsof a plumber's time
0drain lines
0electrical outlets
1 inchin and out
We recommend having a plumber install it. There is no drain line and no electricity, just an inlet and an outlet, so it is about an hour or two of a plumber's time. Aidan supports your plumber by phone at 800-460-5810. If you have done some plumbing and would rather do it yourself, text Aidan at 443-277-2204 with any questions.
The steps
On the cold main after the shutoff, before the water heater (after any sediment filter).
Pour the Filtersorb SP3 into the tank through the funnel.
Thread on the head and connect the inlet and outlet. Follow the flow arrows: it runs upflow.
Open the water slowly with the head in bypass, then put it in service and let the air out at a faucet.
The water still tests hard: that is how a conditioner works.
Allow about 60 inches of height to take the head off and fill the tank.
Questions from you or your plumber: call 800-460-5810 or text 443-277-2204.
About 3 yrsSP3 refill
Nothingin between
0salt bags
No salt, no backwash, no settings, no electricity.
SP3 refill: Aidan quotes about $1,200 to $1,500 for the 14 liters; text him for today's price.
Hard scale building up again on the showerhead or faucets means the SP3 is spent. Spots where water dries on glass are normal.
A refill is media only: the tank and head are reused.
Aidan tells customers to plan on about 3 years; Watch Water rates the media 5 to 7 years.
Most salt-free systems look the same online. Here is what you can check on this one.
✔The media amount is printed. 14 liters of Filtersorb SP3. Most systems we checked do not publish it.
✔Name-brand media you can look up. Watch Water Filtersorb SP3, made in Germany, with a public data sheet, not "proprietary" beads.
✔The limits, stated. Up to 25 grains, no iron, no sulfur. If your water is outside them, we say so.
✔The running cost, up front. An SP3 refill about every 3 years, and Aidan gives you the refill price before you buy. No "never needs replacing".
✔Aidan sizes it, and tells you if a softener fits better. Text your water report to 443-277-2204.
Frequently Asked Questions
No. It does not remove hardness, so the water still tests hard and will not feel slippery. It keeps the hardness from sticking: Aidan's words are that it converts it "to a microscopic crystal, so it can't attach itself to the plumbing and the water-using appliances." If you want soft water, choose a salt softener.
For most homes, Aidan recommends the softener: it removes the hardness and costs less to run (our Fleck 5600SXT 48,000 grain water softener is $1,995). Choose this salt-free conditioner when you cannot run a drain or an electrical outlet to the spot, do not want to carry salt, are on a diet that limits sodium or potassium, or only need to stop scale. Not sure? Text Aidan at 443-277-2204.
Pick by the household: the Small 1.5 (9 L) for 2 to 4 people and 1 to 2 bathrooms, $2,495; the Medium 2.0 (10 L) for 3 to 5 people and 2 to 3 bathrooms, $2,695; the Large 2.5 (14 L) for 4 to 7 people and 3 to 4 bathrooms, $2,895. Every size keeps up with a whole house's flow; the bigger ones hold more media for more people. If people and bathrooms point to different sizes, go by people; at the top of a band, go one size up.
Aidan sizes it for up to about 25 grains per gallon. Watch Water rates its media higher, but above 25 grains Aidan recommends a salt softener. Your water report may list hardness in mg/L; divide by 17.1 to get grains per gallon.
Aidan tells customers to plan on about 3 years; Watch Water rates Filtersorb SP3 5 to 7. Aidan quotes about $1,200 to $1,500 for the 14 liters; text him for today's price. A refill is media only: the tank and head stay.
We recommend one. There is no drain line and no electricity, just an inlet and an outlet, about an hour or two of a plumber's time, and Aidan supports your plumber by phone at 800-460-5810. If you'd rather do it yourself, you can; text Aidan at 443-277-2204 with any questions.
No. The tank ships empty. The Filtersorb SP3 ships separately and is poured in through the included funnel at install. A filled tank is too heavy to ship safely and could be damaged in freight.
Aidan recommends a regular salt softener ahead of a tankless heater. A conditioner leaves the hardness in the water, and a softener removes it.
No. It only keeps hardness from forming scale. On city water, if you also want the chlorine taste and smell out, the filter + salt-free conditioner in the same size ($4,795) puts a catalytic carbon tank ahead of this one. Iron, sulfur, lead and PFAS need their own treatment.
Only after the well's iron, manganese and sulfur are fully removed. Watch Water limits iron to 0.5 ppm and manganese to 0.05 ppm, and Aidan will not put a salt-free conditioner on water with any iron. If the well has iron or sulfur, it needs an iron filter first. Text Aidan your well test.
Filtersorb SP3 is certified by IAPMO R&T to NSF/ANSI/CAN 61 and 372, which cover materials safety in drinking water. Those standards do not test scale reduction, and we do not claim a scale reduction percentage.
A dealer quote one of our callers shared, and what to check on any salt-free system
What to check on any salt-free system
Ask three things. Which salt-free media, and how many liters? What hardness is it good for, and what water does it not work on? And what does the media replacement cost, and when? A claim that salt-free media never needs replacing, or a scale reduction percentage with no named test, is a claim you cannot check.
The cost comparison
Big-box dealer salt-free system
$8,500
• Sold to the caller as lasting 25 years with no maintenance
• Installed by the dealer; media type and amount not stated in the quote
A salt-free quote a caller shared with Aidan (2026), sold as lasting 25 years
This system, shipped
$2,895
• Filtersorb SP3 refilled about every 3 years (Aidan)
• Named media in a stated amount; your plumber installs it, Aidan supports by phone
Plus an hour or two of a plumber's time
Dealer prices vary; the $8,500 is one real quote a Texas caller shared with Aidan in 2026 for an installed salt-free system that he was told would last 25 years with no maintenance. Aidan: "There's no salt-free conditioner that lasts 25 years." You pay for the equipment here, shipped free, and your own plumber.
What you get here
Watch Water Filtersorb SP3, with a public data sheet, in the amount printed on the page. A Vortech tank with no gravel and a Clack non-electric head with a bypass valve, nothing to program. The refill price before you buy. And Aidan, 32 years in water treatment, by phone and text 7 days a week, who will tell you if a softener suits you better.
Contact Us
800-460-5810
We're here to help.
1-Year Risk-Free Guarantee
Our performance guarantee, in the words of our refund policy
If a water treatment system we sized for you is installed and still does not fix the problem it was sized for, we make it right. The guarantee applies when the system was chosen from a water test you reviewed with Aidan before you bought it; it was installed according to the instructions and maintained according to its manual; your water is within what the system was sized for; and you call us first, so we can troubleshoot the setup and replace parts if needed. If it still does not fix the problem after that, we refund the price of the system. You do not ship it back. Shipping, installation and plumbing costs are not refunded.
7 DaysA Week, Aidan by Phone and Text
32Years in Water Treatment
Aidan sizes this system from your water report before you buy: your utility's report or a lab test, plus how many people and bathrooms. When he has, the guarantee below covers whether it fixes the problem it was sized for. Bought without that review, the 30-day return terms below still apply.
Returns
+
New, unopened equipment can be returned within 30 days of delivery with our approval; the buyer pays return freight and a 25% restocking fee applies (waived on an exchange of equal or greater value). Full terms: our refund policy.
How the guarantee works
1
It does not fix the problem
New scale keeps forming on water within what the system was sized for.
2
You call us first
Aidan troubleshoots the setup with you and replaces parts if needed.
Refund, nothing shipped back
If it still does not fix the problem, we refund the price of the system. Shipping, installation and plumbing are not refunded.
Not sure this is the right size? Don't guess. Text me a photo of your water utility's report, or a lab test, and how many people live in the house. I'll tell you which size fits, or whether a softener would suit you better.