Fleck 2510AIO 2.5 Iron Filter, 2510SXT 2.5 Acid Neutralizer & 5600SXT 48,000 Grain Water Softener
Treats low pH, iron, and hardness in the correct order. 3 systems, properly sized, ready to install.
Watch This Before BuyingMeet Aidan, your water treatment expert
Iron + Hardness + Low pH?Most people calling about this package already know they have multiple well water problems but are not sure which systems they need or what order to install them in. Aidan will review your water test results, ask about your household size and plumbing, and confirm this is the right package. If you only need 1 or 2 systems, he will point you to a smaller setup and save you money. No pressure, no upsell.
✓ Free shipping to all lower 48 states (ships freight on pallet)
✓ Fill funnel for calcite and resin
✓ 7-day expert support from Aidan at 800-460-5810
Backwashing Acid Neutralizer
Model
Fleck 2510SXT Electronic Demand Backwashing
Media
Calcite, 250 lbs (5 bags)
Tank
13" x 54" Vortech (gravel-free)
pH Range
5.5 - 6.9 (raises to ~7.0)
Drain
Required (backwashing system)
Electricity
120V outlet required
Iron and Sulfur AIO Filter
Model
Fleck 2510AIO Air-Injection Oxidation
Media
Katalox-Light, 2.5 cubic feet
Tank
13" x 54" Vortech (gravel-free)
Iron Capacity
Up to 10 ppm
Sulfur Capacity
Up to 5 ppm H2S
Connections
1" male threaded
Drain
Required (backwashing system)
Electricity
120V outlet required
Water Softener (48,000 Grain)
Model
Fleck 5600SXT Electronic Demand
Resin
10% crosslink, 1.5 cubic feet
Tank
10" x 54" Vortech (gravel-free)
Salt Tank
18" x 33" with safety float
Service Flow
Up to 10 GPM continuous
Bypass
1" stainless steel, pre-installed
Power Backup
48-hour capacitor
All tanks and valves made in the USA. 5-year valve warranty, 10-year tank warranty on all systems.
Call before you install. With 3 systems, placement and plumbing order matter. Aidan walks customers through the layout over the phone. Call 800-460-5810 with your basement or utility room dimensions.
Water softener (requires 120V outlet + drain line)
Why This Order Matters
The acid neutralizer goes first because this package is built for low pH water. Correcting the pH right away protects everything downstream: acidic water attacks the internals of the other systems, and the Katalox-Light iron media performs far better at neutral pH than in acidic water. The iron filter then removes iron, manganese, and sulfur, and the softener finishes the job by removing hardness minerals, including the small amount of hardness the calcite adds. Getting this order wrong causes premature media failure and poor performance.
Electrical Requirements
All three systems need power: the iron filter, the backwashing acid neutralizer, and the water softener. You need 3 available 120V outlets in your utility area (a standard power strip works).
Drain Requirements
All three systems need drain lines for backwash and regeneration. Route 1/2" tubing to a floor drain, utility sink, or outside (max 20 feet each).
Space Planning
Plan for roughly 5-6 linear feet of wall space. The acid neutralizer and iron filter tanks are 13" in diameter, the softener tank is 10", plus the 18" brine tank.
Time Estimate
Most homeowners complete the full install in 4-6 hours over a weekend. If you hire a plumber, they can call Aidan at 800-460-5810 for programming help with the Fleck valves.
Iron / Sulfur AIO Filter Minimal
The Fleck 2510AIO backwashes automatically on a schedule you set during installation. Katalox-Light media lasts 7-10+ years under normal conditions. No media changes unless iron levels are extreme.
Backwashing Acid Neutralizer Every 12-18 months
Add calcite through the fillport when the media level drops to about 2/3 full. No valve removal needed. The automatic backwash keeps the bed clean between top-offs. Calcite is available in 50 lb bags.
Water Softener Monthly salt check
Keep the brine tank at least 1/4 full with salt. Most homes go through a 40 lb bag every 4-8 weeks. The Fleck 5600SXT regenerates automatically based on usage.
Questions about maintenance? Call or text 800-460-5810, available 7 days a week.
"Our well had iron stains on everything, the water was acidic, and we had hard water buildup. Aidan helped us pick the right system and walked us through the whole install over the phone." ★★★★★
Michael R., Verified Buyer
"Water tested neutral pH and soft for the first time in years. No more orange stains in the toilets and the soap actually lathers now. Worth every penny." ★★★★★
Daniel B., Verified Buyer
"If you are fairly handy, you will have no problem installing these systems. Aidan helped me with the valve programming over the phone. The whole thing took a weekend." ★★★★★
Jonathan P., Verified Buyer
What's In This Package
Installed in this order on your main water line.
Stage 1
Whole House Iron Filter for Well Water
Removes iron, manganese, and sulfur (air injection + Katalox-Light)
You save $400.00 when purchased as a complete system
Video Guides
Watch our well water treatment guides has 32 years of industry experience.
Iron Filters for Well Water: The Complete Guide
Acid Neutralizer and Water Softener: Do You Need Both?
Complete Guide to Well Water Filtration
Why These 3 Systems Together?
The Classic Bad-Well Trifecta: Iron, Low pH, and Hardness
Iron stains your fixtures and clogs appliances. Low pH corrodes copper pipes from the inside out and leaches metals into your drinking water. Hard water leaves white scale on everything it touches. If your well has all three, you need a system that handles them in the right sequence.
This package treats each problem in the correct order. The backwashing acid neutralizer comes first, raising pH to neutral so acidic water never touches the downstream systems, with an automatic backwash that keeps the calcite bed clean. The iron filter then oxidizes and filters out iron and sulfur, working at peak efficiency in pH-corrected water. And the water softener removes hardness minerals, including the small amount of hardness the acid neutralizer adds.
Every system is properly sized to work with the others, so you do not end up with flow rate bottlenecks. All media is included, all tanks are Vortech gravel-free, and all valves are professional-grade Fleck. Free shipping to the lower 48.
✔3-System Package
✔Treats Low pH + Iron + Hardness
✔All Media Included
✔Free Shipping
✔5 to 10 Year Warranties
✔7-Day Expert Support
✔Made in USA
Feature
Our System
Others
System Count
✔
3 Matched Systems
Mismatched Units
Iron Removal
✔
2.5 CF Katalox-Light AIO
Small Cartridge or None
pH Correction
✔
2.5 CF Fleck 2510SXT Backwashing
Often Missing Entirely
Softener Capacity
✔
48,000 Grain / 10% Crosslink
32K / Standard 8% Resin
Expert Support
✔
7-Day Phone + Text + Email
Limited or None
Warranty
✔
5-Year Valves + 10-Year Tanks
1-Year Limited
Save vs Individual
✔
$400 Package Savings
No Discount
System Count
✅ Us3 Matched Systems
❌ ThemMismatched Units
Iron Removal
✅ Us2.5 CF Katalox-Light AIO
❌ ThemSmall Cartridge or None
pH Correction
✅ Us2.5 CF Fleck 2510SXT Backwashing
❌ ThemOften Missing Entirely
Softener Capacity
✅ Us48,000 Grain / 10% Crosslink
❌ Them32K / Standard 8% Resin
Expert Support
✅ Us7-Day Phone + Text + Email
❌ ThemLimited or None
Warranty
✅ Us5-Year Valves + 10-Year Tanks
❌ Them1-Year Limited
Save vs Individual
✅ Us$400 Package Savings
❌ ThemNo Discount
✔ Got a Question About Your System?
Whether you need help with installation order, plumbing layout, valve programming, media refills, or troubleshooting any of the systems, Aidan is available 7 days a week. Real answers from someone who has been doing this for 29+ years.
📞 Call Us800-460-5810
✉️ Email Supportsupport@midatlanticwater.net
🕒 Live Hours7 days a week, 8am-5pm Eastern
Frequently Asked Questions
This package pairs the backwashing Fleck 2510SXT acid neutralizer with an iron filter on purpose. The acid neutralizer sits first in line, so raw well water with iron in it passes through the calcite bed before the iron filter removes it. The automatic backwash keeps that iron from cementing the calcite and prevents channeling. If your well has no iron, the upflow (non-backwashing) version costs less and skips the drain line. Call Aidan at 800-460-5810 with your water test and he will tell you which one fits.
The acid neutralizer comes first because this package is built for low pH water. Correcting the pH right away protects everything downstream: acidic water attacks the internals of the other systems, and the Katalox-Light iron media performs far better at neutral pH. The iron filter then removes iron, manganese, and sulfur, and the softener finishes by removing hardness, including the small amount the calcite adds. Getting this order wrong causes premature media failure and poor performance.
Yes, most of our customers do. Aidan walks people through the full installation over the phone, 7 days a week. You need basic plumbing skills (cutting pipe, making connections) and the ability to lift 50 lb bags of media. Plan 4-6 hours over a weekend. If you hire a plumber, they can call Aidan directly for help with the Fleck valve programming.
The biggest recurring items are: salt for the softener (a 40 lb bag every 4-8 weeks) and calcite for the acid neutralizer (top off every 12-18 months). The iron filter media lasts 7-10+ years. None of these tasks are complicated. We have guides for each one and you can always call us if you need help.
It depends on your water test. If your well produces sand or grit, a Big Blue sediment filter ahead of the iron filter is cheap insurance. If your test shows coliform bacteria, you need a UV sterilizer as the final stage. Both can be added to this package. Call 800-460-5810 and we will configure it for your well.
Purchasing all 3 systems together saves $400 compared to buying each system individually. Everything ships on the same pallet, arrives at the same time, and is supported by the same expert from start to finish. We also pre-match the sizing across all systems so you do not end up with a bottleneck where one system is undersized for the rest.
Fleck 2510AIO 2.5 Iron...$6,285.00
Why a 3-System Package Costs More
Professional Components vs. Budget Alternatives
What You Get With Budget Systems
Budget iron-filter-and-softener combos cut corners where it counts: undersized tanks that cannot keep up with real household flow rates, cheap 8% crosslink resin that degrades in a few years, timer-based regeneration that wastes salt and water, and partial media fills that need immediate topping off.
Worse, most bundles sold online skip the acid neutralizer entirely. Without pH correction, acidic water corrodes copper pipes, degrades softener resin faster, and the iron filter has to work harder. You end up replacing components years earlier than you should.
The Real Cost Comparison
Budget Iron + Softener Combo
$3,000-4,500
❌Lifespan: Fails in 3-4 years
❌Result: Frequent repairs, poor water quality, leaks
❌Support: None
$1.10-1.40/day (shorter component life, more maintenance)
Best Long-Term Value
Our 3-System Package
$6,285
✅Lifespan: Lasts 15+ years
✅Result: Done right the first time, peace of mind
✅Support: Lifetime USA Support
$0.86/day over a 20-year system life
When you factor in the premium components, full media fills, and unlimited expert support, this system delivers better long-term value than budget alternatives that need more frequent media replacement, waste more salt, and leave you without help when something needs adjustment. The 10% crosslink resin alone lasts 20-30% longer than the standard 8% resin used in budget packages.
What You Get With Our System
This package uses the same professional-grade components we have been selling for 29+ years: Fleck 2510AIO, 2510SXT, and 5600SXT valves, Katalox-Light iron media, and 10% crosslink softener resin. Every tank is Vortech gravel-free for better flow and easier service.
You also get Aidan on the phone 7 days a week. Before the purchase, during installation, and for the life of your system. That alone is worth more than most people realize until they need it.
Contact Us
800-460-5810
We're here to help.
1-Year Risk-Free Guarantee
Low pH, Iron, and Hardness Handled in the Right Order
If this system fails to solve your well water problems within 30 days of installation, contact us and we will work with you to resolve the issue. Whether that means troubleshooting your setup, adjusting valve programming, replacing a component, or issuing a full refund. No shipping 400+ pounds of equipment back. No restocking fees. No runaround.
10,000+Systems Installed
455+Verified Reviews
29+Success Rate
After 29+ years of selling and supporting water treatment systems, we know what works. This is our go-to package for the classic bad-well combination: iron, low pH, and hardness hitting all at once. We pair these specific components because that treatment sequence delivers years of trouble-free performance when the systems are properly sized and installed in the right order.
The Industry "Return Policy" Trap
+
Most online retailers offer a return policy that requires you to ship everything back at your expense. For a system this size, that is 400+ pounds of wet equipment on a pallet. After paying $400+ in return freight, you often find a 15-25% restocking fee on top. It is designed to make returns impractical.
How Our Real Guarantee Works
1
The System Doesn't Fix Your Water
If your water test still shows problems after installation, that is on us. Every stage should be performing.
2
You Call Us, We Fix It
We troubleshoot with you: water test results, installation order, valve settings, flow rates. Most issues are resolved with a simple adjustment.
Full Refund, No Hassle
If we cannot resolve the issue, you get a full refund. We handle the logistics. You do not ship anything back. That is the difference between a real guarantee and a return policy.
This is the package I put together when someone calls with iron stains, acidic water eating their pipes, and hard water scaling everything. The backwashing acid neutralizer is the right choice next to an iron filter because the automatic backwash keeps the calcite bed clean. Instead of piecing together systems from different sellers and guessing at the install order, you get one matched package from one company with one person to call.