Pure-75 Reverse Osmosis System - Quarter-Turn Quick Change, 75 GPD
|
Pure-75 Reverse Osmosis System - Quarter-Turn Quick Change, 75 GPD
Not sure which reverse osmosis system fits your water?
The right RO depends on your water and your patience for maintenance. Send Aidan your water test results (or just tell him city or well) and he will recommend honestly between the MAW-50, the Pure-75, and the certified Pentair systems, even when the answer is the cheaper one. On well water he will also flag anything that needs treating upstream so your membrane lasts its full 24 months.
Complete Pure-75 Quick-Change RO System
- ✓ 4-stage RO unit with all four Twist & Loc cartridges installed - 5 micron sediment, carbon block pre-filter, 75 GPD TFC membrane, carbon block post-filter
- ✓ 3.2 gallon storage tank - polypropylene-coated, NSF-approved white steel, holds finished water so it is ready at the faucet
- ✓ Chrome lead-free long-reach faucet - dedicated drinking water faucet for the sink
- ✓ 3/8" tank-to-faucet delivery line - faster glass-filling than the 1/4" line on most budget RO units
- ✓ Quick-connect fittings + angle stop adapter valve - push-to-connect tubing, no soldering
- ✓ Filter wrench and installation hardware
- ✓ Free shipping to all lower 48 states
Replacement filters: the Pure-75 Filter Replacement Kit ($195) covers all four cartridges, including the membrane. Individual cartridges, including an optional alkalinity remineralization cartridge, are available by phone or text at 800-460-5810.
The 4 Stages
1 Sediment filter (5 micron) - strips sand, silt, and rust before they reach the carbon
2 Carbon block pre-filter - removes chlorine, taste, and odor to protect the membrane
3 RO membrane (75 GPD TFC) - rejects dissolved solids at the molecular level
4 Carbon block post-filter - final taste polish on the way to the faucet
System Overview
| System Type | 4-stage under-sink reverse osmosis (point of use) |
|---|---|
| Cartridge Design | Twist & Loc quick-change: quarter-turn removal with no water shutoff, even under full pressure |
| Membrane | 75 GPD nominal TFC reverse osmosis membrane |
| Actual Production | Approximately 30.65 gallons per day (116 L/day) at standard conditions* |
| Storage Tank | 3.2 gallon polypropylene-coated NSF-approved white steel |
| Faucet | Chrome lead-free long-reach faucet (included) |
| Delivery Line | 3/8" tank-to-faucet line for faster faucet flow |
| Fittings | Quick-connect throughout; angle stop adapter valve included |
| Power | None required - runs on line pressure |
| Certifications | Storage tank is NSF approved. The system itself is not NSF system-certified - if you want NSF/ANSI 42 + 53 + 58 system certification, see our Pentair FreshPoint RO ($795) |
*75 GPD is the membrane's nominal rating; approximately 30.65 GPD is the measured production at standard test conditions. Real-world output varies with feed pressure and temperature. Either number is far beyond the 2-4 gallons a day a family actually drinks.
Filter Life & Replacements
| Sediment + Carbon Blocks | Replace every 6 months (quarter-turn, under 2 minutes) |
|---|---|
| RO Membrane | Replace every 24 months |
| Complete Kit | Pure-75 Filter Replacement Kit - $195, includes all four cartridges with membrane |
| Optional | Alkalinity remineralization cartridge for mineral-added taste - order by phone: 800-460-5810 |
⚡
Standard under-sink install with quick-connect fittings throughout. The angle stop adapter valve taps the cold line without soldering, the tubing pushes to connect, and no electricity is needed anywhere in the system.
On well water, treat the well problems first. Iron, manganese, heavy sediment, or bacteria will foul any RO membrane fast. If you are on a well and have not tested recently, start with a well water test kit and we will confirm what (if anything) needs to go upstream.
- Shut off the cold supply under the sink and relieve pressure at the faucet (only needed for the initial install, never again for filter changes)
- Install the angle stop adapter valve on the cold line and mount the RO unit in the sink cabinet
- Drill the faucet hole (or use an existing sprayer hole) and mount the chrome lead-free faucet
- Position the 3.2 gallon storage tank and connect the 3/8" tank-to-faucet delivery line
- Connect the feed, drain, and tank lines with the quick-connect fittings
- Turn the water on, check for leaks, let the tank fill, then drain the first tank or two to flush the new cartridges
Need help? Call or text Aidan at 800-460-5810, 7 days a week. Most homeowners with basic DIY comfort finish the install in about an hour; any local plumber can do it if you would rather not.
✨
This is why people buy the Pure-75. Cartridges disengage with a quarter twist of the wrist, with the water still on, even under full pressure. No housing wrench, no sump of water dumped in the sink, no o-rings to re-seat. A full filter change takes under 2 minutes.
Replacement Schedule
- Every 6 Months Sediment + both carbon block cartridges. These protect the membrane and keep taste sharp.
- Every 24 Months RO membrane. The membrane does the dissolved-solids work; do not stretch this interval.
How a Filter Change Works
- Grip the old cartridge and give it a quarter twist - it disengages and the flow stops automatically. No water shutoff needed.
- Twist the new cartridge in until it locks.
- Done. Repeat for each cartridge that is due. Total time: under 2 minutes.
Ordering replacements: the Pure-75 Filter Replacement Kit ($195) includes the sediment, both carbon blocks, and the membrane. In between membrane changes you only need sediment + carbon: call or text 800-460-5810 and we will ship individual cartridges, including the optional alkalinity remineralization cartridge if you want mineral-added taste.
Filter Day in Under 2 Minutes, With the Water Still On
Quarter-turn Twist & Loc cartridges + a proven 4-stage, 75 GPD reverse osmosis train
Most reverse osmosis systems make you pay for clean water twice: once at the checkout, and again every six months when filter day means a housing wrench, a shutoff valve, a sump full of water dumped in the sink, and an o-ring that may or may not seal on the first try. The Pure-75 removes that entire ritual. Each Twist & Loc cartridge disengages with a quarter twist of the wrist while the system is under full pressure. The flow stops automatically, the new cartridge twists in, and you are done in under 2 minutes.
The filtration itself is a proven 4-stage train: a 5 micron sediment filter, a carbon block pre-filter, a 75 GPD TFC reverse osmosis membrane, and a carbon block post-filter for final taste polish. Actual production runs approximately 30.65 gallons per day at standard conditions, roughly ten times what a family drinks, and the 3.2 gallon NSF-approved steel storage tank keeps finished water ready at the included chrome lead-free faucet. The 3/8 inch delivery line fills a glass noticeably faster than the 1/4 inch line on most budget units, and the whole system runs on line pressure with no electricity.
Maintenance costs are predictable: sediment and carbon cartridges every 6 months, the membrane every 24 months, and the complete $195 replacement kit covers all four cartridges including the membrane. Free shipping, 7-day-a-week support, and honest sizing from real water treatment specialists with 30+ years of experience.
✔
Quarter-Turn Filter Changes
✔
No Water Shutoff Needed
✔
Filter Changes in Under 2 Minutes
✔
4 Stages, 75 GPD Membrane
✔
3.2 Gallon NSF-Approved Tank
✔
Lead-Free Chrome Faucet Included
✔
No Electricity Required
| Feature | Our System | Others |
|---|---|---|
| Filter Change Time | ✔ Under 2 minutes - quarter twist per cartridge | 30-60 minutes with a housing wrench |
| Water Shutoff | ✔ None - change cartridges under full pressure | Shut off the feed and depressurize first |
| Tools Needed | ✔ None - cartridges twist by hand | Housing wrench, towels, and patience |
| Spills | ✔ Sealed cartridges - no open sump of water | Each housing dumps a sump of water |
| O-Rings | ✔ None to handle - seals are built into each cartridge | O-rings to fish out, lube, and re-seat every change |
| Faucet Delivery Line | ✔ 3/8" tank-to-faucet line - faster glass filling | 1/4" line on most budget units |
| Replacement Cost | ✔ $195 complete kit covers all 4 cartridges incl. membrane | Mixed parts from multiple listings, easy to mismatch |
| Expert Support | ✔ 7-day phone, text & email - 30+ years experience | Limited or none |
Filter Change Time
✅ Us
Under 2 minutes - quarter twist per cartridge
❌ Them
30-60 minutes with a housing wrench
Water Shutoff
✅ Us
None - change cartridges under full pressure
❌ Them
Shut off the feed and depressurize first
Tools Needed
✅ Us
None - cartridges twist by hand
❌ Them
Housing wrench, towels, and patience
Spills
✅ Us
Sealed cartridges - no open sump of water
❌ Them
Each housing dumps a sump of water
O-Rings
✅ Us
None to handle - seals are built into each cartridge
❌ Them
O-rings to fish out, lube, and re-seat every change
Faucet Delivery Line
✅ Us
3/8" tank-to-faucet line - faster glass filling
❌ Them
1/4" line on most budget units
Replacement Cost
✅ Us
$195 complete kit covers all 4 cartridges incl. membrane
❌ Them
Mixed parts from multiple listings, easy to mismatch
Expert Support
✅ Us
7-day phone, text & email - 30+ years experience
❌ Them
Limited or none
✔ Expert Drinking Water Support
From sizing to install guidance to filter change reminders and individual cartridge orders (including the optional alkalinity remineralization cartridge), Aidan provides hands-on support at every step. Real person, real expertise, 30+ years of water treatment experience. No bots, no scripts.
📞 Call Us
800-460-5810
✉️ Email Support
support@midatlanticwater.net
🕒 Live Hours
7 days a week
Frequently Asked Questions
Customer Reviews
0.0 Be the first to review this item
Write a Review Ask a Question
Pure-75 Reverse Osmosi...
$595.00