{"product_id":"well-water-pfas-system","title":"PFAS Whole House Well Water Filter System (Forever Chemicals + UV)","description":"\u003cp\u003eWhole-house well water system for forever-chemical (PFAS) contamination plus bacteria and sediment, 3-stage train of sediment pre-filter, PFAS-selective ion exchange resin, and NSF\/ANSI 55 Class A UV sterilizer, sized for 3 to 5 person households with up to 4 bathrooms.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA 3-stage whole-house well water filter system for private wells with confirmed PFAS contamination, combining sediment pre-filtration, WQA Gold Seal certified PFAS-selective ion exchange resin, and NSF\/ANSI 55 Class A validated ultraviolet disinfection, all in a single point-of-entry train sized for 3 to 5 person, up to 4 bathroom households.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis system is the Mid Atlantic Water answer for well-water households with documented PFAS, PFOA, PFOS, or GenX in their source water who also need bacterial protection. Three stages, in the correct treatment order: a 20 inch Big Blue 5 micron polyspun sediment cartridge first, a 2 cubic foot Vortech tank loaded with ResinTech SIR-110-HP PFAS-selective ion exchange resin second, and a 12 GPM Viqua VH410 NSF\/ANSI 55 Class A ultraviolet sterilizer third. No salt, no drain, no backwash, and only one 110V outlet for the UV.\u003c\/p\u003e\n\n\u003ch3\u003eBest for, and not for\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eUse this system if your water test shows:\u003c\/strong\u003e PFOA, PFOS, PFNA, PFHxS, GenX (HFPO-DA), or other PFAS compounds above EPA Maximum Contaminant Levels (4 parts per trillion for PFOA and PFOS, 10 parts per trillion for PFNA, PFHxS, and GenX), positive total coliform or E. coli bacteria, sediment or rust particles, and your home is on a private well within drift distance of a military base, airport, fire training site, landfill, industrial facility, or AFFF firefighting-foam impacted area. Sized for 1 to 4 bathroom homes with 2 to 6 occupants and a peak demand of 8 to 12 gallons per minute (the PFAS resin tank is the flow-limiting stage at 8 GPM service flow).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStep up or change systems if your water test shows:\u003c\/strong\u003e hardness above 5 grains per gallon (add a softener ahead of the PFAS resin to extend its life), iron above 0.3 ppm or manganese above 0.05 ppm (you must add an iron filter ahead of the PFAS resin or it will foul prematurely), low pH below 6.5 (acidic water shortens resin life and corrodes copper plumbing, add an acid neutralizer first), or chloramine on a municipal supply (add a Centaur catalytic carbon stage before the PFAS resin). Do not buy this system if you have not yet confirmed PFAS is present in your water with a certified-lab test, or if your only goal is drinking-water protection (an under-sink reverse osmosis system is a much cheaper point-of-use alternative for drinking water alone). PFAS is a class of more than 12,000 individually identified compounds; this system targets the regulated and most commonly studied PFAS species but no residential filter on the market today removes every PFAS variant.\u003c\/p\u003e\n\n\u003ch3\u003eWatch the complete well water filtration walkthrough before you buy\u003c\/h3\u003e\n\n\u003cp\u003eWatch our walkthrough \u003cem\u003eComplete Guide to Well Water Filtration Systems\u003c\/em\u003e on YouTube before ordering: https:\/\/www.youtube.com\/watch?v=KAd_D_2qjm0. It covers the four contaminants every well-water household should treat (sediment, dissolved contaminants, bacteria, and pH), the correct treatment order (sediment first, then dissolved contaminants like PFAS, then UV at the end), how to read your water test results, and when a PFAS-specific system like this one is the right call versus a generic carbon filter. If your test shows confirmed PFAS plus a positive bacteria result, this 3-stage configuration was built for exactly that profile.\u003c\/p\u003e\n\n\u003ch3\u003eTalk to Aidan before you buy. Free expert consultation, 800-460-5810.\u003c\/h3\u003e\n\n\u003cp\u003eFree pre-purchase phone consultation with our owner Aidan, 7 days a week, 8 AM to 5 PM Eastern. Call \u003cstrong\u003e800-460-5810\u003c\/strong\u003e or text \u003cstrong\u003e443-277-2204\u003c\/strong\u003e. Email your water test results, your utility's most recent UCMR or PFAS sampling data, or a description of your contamination source to \u003cstrong\u003esupport@midatlanticwater.net\u003c\/strong\u003e and Aidan will confirm whether this system is the right fit, whether ion exchange or activated carbon is the better PFAS technology for your situation, and whether your raw water needs softening, iron removal, or pH correction before reaching the PFAS resin. No upsell, no hard sell, no commission. Mid Atlantic Water is an online-only national ecommerce business shipping to all 50 states; consultation, water test interpretation, and ongoing support are remote and free, and there is never an in-home service component to upsell.\u003c\/p\u003e\n\n\u003ch3\u003eIf you have not tested for PFAS yet\u003c\/h3\u003e\n\n\u003cp\u003ePFAS removal is one of the few water treatment categories where source-water testing matters more than the system itself. Standard well water tests do not include PFAS panels. Before purchasing whole-house treatment, confirm PFAS is in your water and at what concentration. Mid Atlantic Water sells certified-lab water testing kits with PFAS panels included. Public sources to check first: the EPA's UCMR 5 PFAS occurrence dataset, your state environmental agency's PFAS map (most states publish one), the EWG Tap Water Database, and your municipal utility's annual Consumer Confidence Report. The April 2024 EPA national primary drinking water regulation set enforceable Maximum Contaminant Levels of 4 parts per trillion for PFOA and PFOS, and 10 parts per trillion for PFNA, PFHxS, and HFPO-DA (GenX), with utilities required to comply by 2029. Private well owners are not covered by EPA enforcement and must test, treat, and verify on their own.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in the 3-stage PFAS plus UV system\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 1, Pentair Pentek 20 inch Big Blue sediment pre-filter (HFPP housing, model 150233, NSF\/ANSI 42 certified High Flow Polypropylene)\u003c\/strong\u003e with a 5 micron polyspun cartridge (4.5 inch by 20 inch standard Big Blue size), heavy-duty steel mounting bracket, and filter wrench. 1 inch female NPT connections, 15 GPM flow, 90 PSI maximum pressure. Traps sand, silt, rust, and particulate matter before it reaches the PFAS resin tank, where suspended solids would otherwise clog the bed and shorten resin life. Cartridge swap once or twice per year. \u003ca href=\"https:\/\/midatlanticwater.net\/products\/20-inch-big-blue-sediment-filter-kit\"\u003eSediment filter kit details\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 2, 2 cubic foot whole-house PFAS removal tank loaded with WQA Gold Seal certified ResinTech SIR-110-HP PFAS-selective ion exchange resin, in a Vortech 12 inch by 48 inch gravel-free polyglass mineral tank with a Clack NSF-certified In-Out head.\u003c\/strong\u003e ResinTech SIR-110-HP is a strong-base anion exchange resin engineered with functional groups that preferentially bind PFAS molecules, providing higher selectivity, faster kinetics, more consistent removal across a wide spectrum of PFAS compounds (PFOA, PFOS, PFNA, PFHxS, GenX \/ HFPO-DA, PFBS, and other long-chain and short-chain species), and longer effective media life on real residential supplies than granular activated carbon. 8 GPM service flow rate. No electricity, no drain, no backwash, no programming. The Clack In-Out head is a fixed downflow service valve. Once installed it operates passively until the resin is exhausted (typically 3 to 7 years on residential supplies depending on PFAS load and competing contaminants). \u003ca href=\"https:\/\/midatlanticwater.net\/products\/pfas-removal-system\"\u003ePFAS removal system details\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 3, Viqua VH410 NSF\/ANSI 55 Class A validated ultraviolet sterilizer\u003c\/strong\u003e rated for 12 GPM whole-house service flow at 40 mJ\/cm squared validated UV dose. Inactivates 99.99 percent of bacteria, viruses, protozoan cysts (Cryptosporidium, Giardia), and other waterborne pathogens. Stainless steel reactor chamber, NSF\/ANSI 55 Class A certified for the treatment of microbiologically unsafe water (the highest UV certification tier, required for any home where the source water has tested positive for coliform or E. coli). 3\/4 inch and 1 inch NPT inlet\/outlet adapters included. Includes the lamp, controller, sleeve, and 3-year manufacturer warranty. Annual lamp replacement; sleeve cleaning at the same interval. Standard 110V grounded outlet required. \u003ca href=\"https:\/\/midatlanticwater.net\/products\/viqua-vh410-uv-system\"\u003eViqua VH410 details\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eWhy ion exchange and not granular activated carbon for the PFAS stage\u003c\/h3\u003e\n\n\u003cp\u003eThe two residential technologies validated for PFAS reduction are granular activated carbon (GAC) and PFAS-selective ion exchange resin. GAC is a general-purpose adsorption media. It works on chlorine, taste, and odor, but its binding sites are non-selective, so dissolved organic matter and other contaminants compete with PFAS for the same capacity. Independent EPA-affiliated studies of point-of-entry GAC systems show average PFAS reduction around 73 percent with very high variability between sites, between compounds, and over time. Ion exchange resins like ResinTech SIR-110-HP are engineered with functional groups that preferentially bind PFAS molecules, providing higher selectivity, faster kinetics, more consistent removal across a wide spectrum of PFAS compounds, and longer effective media life on real residential supplies. For homes where PFAS reduction is the primary treatment goal, ion exchange is the technology recommended by current EPA-affiliated PFAS treatment guidance documents.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual maintenance is three tasks\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSediment cartridge replacement.\u003c\/strong\u003e Swap the 5 micron polyspun cartridge once or twice per year, depending on how dirty your well water runs. Filter wrench is included. Replacement cartridges run about $10 to $15 each.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV lamp replacement.\u003c\/strong\u003e Replace the Viqua VH410 UV lamp once per year and clean the quartz sleeve at the same time. The controller will alarm when the lamp reaches end of life. Replacement lamps run about $130.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFAS resin re-bed every 3 to 7 years.\u003c\/strong\u003e The PFAS-selective ion exchange resin gradually reaches capacity. Re-bed interval depends on raw water PFAS concentration, total dissolved organics, and water usage. We recommend an annual PFAS verification test after the second year to track breakthrough; replace the resin when effluent PFAS rises above your target threshold.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eThat is the complete maintenance plan. There is no salt to buy, no drain to clear, no timer to reprogram, no chemicals to dose, no backwash cycle to schedule.\u003c\/p\u003e\n\n\u003ch3\u003eWhy a sediment filter ahead of the PFAS tank\u003c\/h3\u003e\n\n\u003cp\u003ePFAS-selective ion exchange resin is sensitive to physical fouling. Suspended solids (sand, silt, rust flakes, well slime) coat the resin beads and block the binding sites that would otherwise capture PFAS. A 5 micron sediment pre-filter removes those solids before they reach the resin and is the single most important pre-treatment for any whole-house PFAS removal system. Skipping the sediment filter shortens resin life by years and is the most common mistake we see on competitor PFAS systems shipped without one.\u003c\/p\u003e\n\n\u003ch3\u003eWhy UV at the end and not at the beginning\u003c\/h3\u003e\n\n\u003cp\u003eUltraviolet disinfection only works on optically clear water. Sediment, iron, manganese, and tannins absorb UV photons before they reach the bacteria, dropping the effective disinfection dose. Placing the UV last, after the sediment filter and the PFAS resin tank have polished the water, gives the lamp a clear water path and the full validated 40 mJ\/cm squared dose at every faucet. UV at the front of the train, on raw well water with sediment and dissolved organics, gives unreliable disinfection and is the second most common mistake we see on competitor multi-stage systems.\u003c\/p\u003e\n\n\u003ch3\u003eWhy this 3-stage configuration and not a 5-stage with softener and iron filter\u003c\/h3\u003e\n\n\u003cp\u003eThis 3-stage system is built for one specific buyer: a private well household with confirmed PFAS contamination, optional bacterial concerns, naturally soft water (under 5 grains per gallon hardness), and no significant iron or manganese. If your water test shows hardness above 5 grains per gallon, iron above 0.3 ppm, manganese above 0.05 ppm, or pH below 6.5, the resin life will drop and you need additional pre-treatment stages ahead of the PFAS tank. Call Aidan to size the right multi-stage configuration for your raw water profile. The bundle saves $490 versus buying the three component products separately, and the components are pre-matched on flow rate, plumbing connection size, and treatment order.\u003c\/p\u003e\n\n\u003ch3\u003eCommon contaminants this 3-stage PFAS plus UV system treats\u003c\/h3\u003e\n\n\u003cp\u003ePFAS, PFOA, PFOS, PFNA, PFHxS, GenX, HFPO-DA, PFBS, perfluorinated compounds, polyfluoroalkyl substances, forever chemicals, AFFF firefighting foam contamination, total coliform bacteria, E. coli, fecal coliform, Cryptosporidium, Giardia, viruses, waterborne pathogens, sand, silt, rust particles, sediment, turbidity. Does not treat hardness, iron, manganese, hydrogen sulfide rotten egg smell, low pH, chlorine, or chloramine; pair with the appropriate dedicated stages if any of those are present in your raw water.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation overview\u003c\/h3\u003e\n\n\u003cp\u003ePlumb the three stages inline at the point of entry, immediately after the well pressure tank and before any branch to the home, in this order: sediment housing first, PFAS resin tank second, Viqua VH410 third. The sediment housing uses 1 inch NPT female connections; the PFAS tank uses 1 inch male threaded connections; the VH410 ships with 3\/4 inch and 1 inch NPT adapters. Standard 110V grounded outlet within reach of the VH410 controller. No drain connection required by any stage. Total wall footprint roughly 2 feet by 5 feet plus the sediment housing and the UV reactor. We ship the PFAS tank pre-loaded with resin (no on-site media install). Most homeowners complete the install in 2 to 4 hours; an experienced plumber finishes in 90 minutes. Installation does not require a permit in most jurisdictions; consult your local code authority.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and ongoing support\u003c\/h3\u003e\n\n\u003cp\u003eSediment housing carries a 1-year manufacturer warranty (Pentair \/ Pentek). PFAS resin tank: 5 year warranty on the Clack In-Out head, 10 year structural warranty on the Vortech mineral tank. Viqua VH410: 3 year warranty on the controller, 1 year on the lamp and sleeve, 10 year structural on the reactor chamber. Mid Atlantic Water provides ongoing phone and email support at 800-460-5810 and support@midatlanticwater.net for the full life of the system, including PFAS breakthrough testing guidance, resin re-bed scheduling, lamp replacement, and troubleshooting.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003cp\u003eSystem Configuration: 3-stage whole-house PFAS removal system with sediment pre-filter and NSF\/ANSI 55 Class A UV disinfection\u003cbr\u003e\nTotal Stages: 3\u003cbr\u003e\nBundle Price: $2395 (saves $490 versus buying the three components separately at $2885)\u003cbr\u003e\nSystem Service Flow Rate: 8 to 12 gallons per minute (limited by the PFAS resin tank at 8 GPM)\u003cbr\u003e\nBackwash Flow Rate Required: 0 GPM (no stage backwashes)\u003cbr\u003e\nDrain Connection Required: none\u003cbr\u003e\nElectrical Connection Required: one 110V grounded outlet for the UV controller\u003cbr\u003e\nSalt Required: none\u003cbr\u003e\nWaste Water Produced: none\u003cbr\u003e\nSized For Bathrooms: 1 to 4 bathrooms\u003cbr\u003e\nSized For Occupants: 2 to 6 occupants (3 to 5 nominal)\u003cbr\u003e\nSediment Stage: Pentair Pentek 20 inch Big Blue housing, model 150233, with 5 micron polyspun cartridge (4.5 inch by 20 inch standard Big Blue), 1 inch NPT female connections, 15 GPM, 90 PSI maximum, NSF\/ANSI 42 certified High Flow Polypropylene housing\u003cbr\u003e\nPFAS Stage: 2 cubic feet of WQA Gold Seal certified ResinTech SIR-110-HP PFAS-selective ion exchange resin in a Vortech 12 inch by 48 inch gravel-free polyglass mineral tank, Clack NSF-certified In-Out fixed downflow service head, 1 inch male threaded connections, no electricity required\u003cbr\u003e\nPFAS Compounds Targeted: PFOA, PFOS, PFNA, PFHxS, GenX (HFPO-DA), PFBS, and additional long-chain and short-chain perfluorinated and polyfluoroalkyl substances\u003cbr\u003e\nPFAS Reduction Performance: reduces PFOA and PFOS to non-detect levels at typical residential influent concentrations (sub 100 ppt raw water)\u003cbr\u003e\nPFAS Resin Service Life: 3 to 7 years on residential supplies, depending on raw water PFAS concentration and total dissolved organics\u003cbr\u003e\nUV Stage: Viqua VH410 NSF\/ANSI 55 Class A validated ultraviolet sterilizer, 12 GPM service flow, 40 mJ\/cm squared validated UV dose, stainless steel reactor chamber, controller with end-of-lamp-life alarm, 3\/4 inch and 1 inch NPT adapters included\u003cbr\u003e\nUV Disinfection Performance: 99.99 percent inactivation of bacteria, viruses, Cryptosporidium, Giardia, and other waterborne pathogens\u003cbr\u003e\nUV Lamp Replacement Interval: annual\u003cbr\u003e\nUV Quartz Sleeve Cleaning Interval: annual\u003cbr\u003e\nOperating pH Range Treated: best for pH 6.5 to 8.5 (acidic water below 6.5 shortens resin life and corrodes plumbing, add an acid neutralizer first)\u003cbr\u003e\nHardness Tolerance: best for soft water households under 5 grains per gallon (no softener included; add a softener if hardness is above 5 GPG)\u003cbr\u003e\nIron Tolerance: less than 0.3 ppm (no iron filter included; add an iron filter if iron is above 0.3 ppm)\u003cbr\u003e\nManganese Tolerance: less than 0.05 ppm (no iron filter included)\u003cbr\u003e\nChlorine and Chloramine Removal: not included (the PFAS resin removes some chlorine but is not optimized for chloramine; add a Centaur catalytic carbon stage if you have chloramine)\u003cbr\u003e\nTotal System Footprint: approximately 2 feet by 5 feet of wall space plus the sediment housing and the UV reactor mounted alongside\u003cbr\u003e\nTank Diameter (PFAS): 12 inches\u003cbr\u003e\nTank Height (PFAS): 48 inches\u003cbr\u003e\nTank Material: Vortech gravel-free polyglass, almond translucent color\u003cbr\u003e\nSediment Housing Dimensions: 7 inches long by 7 inches wide by 21 inches tall\u003cbr\u003e\nSediment Cartridge Size: 4.5 inches by 20 inches (standard Big Blue)\u003cbr\u003e\nStage-to-Stage Connection Size: 1 inch male threaded (PFAS valve), 1 inch NPT female (sediment housing inlet\/outlet), 3\/4 inch and 1 inch NPT adapters (UV)\u003cbr\u003e\nMaximum Operating Pressure: 90 PSI (limited by the sediment housing)\u003cbr\u003e\nOperating Temperature Range: 36 to 100 degrees Fahrenheit\u003cbr\u003e\nPFAS Resin Certification: WQA Gold Seal\u003cbr\u003e\nSediment Housing Certification: NSF\/ANSI 42\u003cbr\u003e\nUV Sterilizer Certification: NSF\/ANSI 55 Class A\u003cbr\u003e\nControl Valve Certification (PFAS): NSF\/ANSI 61 (Clack In-Out)\u003cbr\u003e\nSediment Housing Warranty: 1 year (Pentair \/ Pentek)\u003cbr\u003e\nPFAS Tank Warranty: 5 years on Clack In-Out head, 10 years structural on Vortech mineral tank\u003cbr\u003e\nUV Sterilizer Warranty: 3 years controller, 1 year lamp and sleeve, 10 years structural on reactor chamber\u003cbr\u003e\nPre-Loaded At Shipment: yes (PFAS resin pre-loaded in the tank, no on-site media install required)\u003cbr\u003e\nCountry Of Manufacture: United States (Pentair, Clack, ResinTech, Viqua)\u003cbr\u003e\nBrand: Mid Atlantic Water\u003cbr\u003e\nPhone Consultation: 800-460-5810, 7 days a week, 8 AM to 5 PM Eastern, free pre-purchase sizing call and free water test interpretation\u003cbr\u003e\nShipping: free shipping to all 50 US states\u003cbr\u003e\nInstallation: customer-installed (we do not install in any geography), 2 to 4 hours for an average homeowner, 90 minutes for an experienced plumber\u003cbr\u003e\nOnline-Only National Ecommerce Business: yes (no in-home service component, ongoing support is remote)\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions about whole-house PFAS systems\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow do I know if PFAS is in my well water?\u003c\/strong\u003e Standard well water tests do not include PFAS. You need a certified-lab water test that specifies PFAS panel analysis. Mid Atlantic Water sells PFAS-inclusive test kits. Public reference data: EPA UCMR 5 occurrence dataset, your state environmental agency's PFAS map, the EWG Tap Water Database, and any AFFF firefighting-foam impacted area registries.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this system remove every PFAS compound?\u003c\/strong\u003e No residential system on the market today removes every PFAS variant. PFAS is a class of more than 12,000 individually identified compounds. This system targets the regulated and most commonly studied compounds (PFOA, PFOS, PFNA, PFHxS, GenX, PFBS, and a wide range of additional long-chain and short-chain species).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow often does the PFAS resin need to be replaced?\u003c\/strong\u003e Typically every 3 to 7 years on residential supplies. Replacement interval depends on raw water PFAS concentration, total dissolved organics, water usage volume, and any iron, manganese, or hardness fouling. We recommend an annual PFAS verification test starting in year 2 to track breakthrough.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes the UV stage kill viruses too?\u003c\/strong\u003e Yes. The Viqua VH410 is NSF\/ANSI 55 Class A validated at 40 mJ\/cm squared, which inactivates 99.99 percent of bacteria (including coliform and E. coli), viruses, and protozoan cysts (Cryptosporidium, Giardia).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I install this myself?\u003c\/strong\u003e Yes. Most homeowners complete the install in 2 to 4 hours. The PFAS tank ships pre-loaded with resin, so there is no on-site media installation. The UV requires one 110V outlet. No drain connection is required by any stage. Aidan walks every customer through the install order, plumbing connections, and start-up on the phone if you want.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat if my water has hardness, iron, or low pH in addition to PFAS?\u003c\/strong\u003e Call Aidan at 800-460-5810 before ordering. Hardness above 5 grains per gallon, iron above 0.3 ppm, manganese above 0.05 ppm, or pH below 6.5 all shorten PFAS resin life and require additional pre-treatment stages. We can build a 4-stage or 5-stage configuration to handle those alongside the PFAS removal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy does ion exchange beat carbon for PFAS?\u003c\/strong\u003e Higher selectivity, faster kinetics, more consistent removal across the PFAS family, and longer effective media life on real residential supplies. Independent EPA-affiliated studies of point-of-entry granular activated carbon show average PFAS reduction around 73 percent with high variability. PFAS-selective ion exchange resin is the technology recommended by current EPA-affiliated PFAS treatment guidance for homes where PFAS reduction is the primary goal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I have to be in a specific state to buy from you?\u003c\/strong\u003e No. Mid Atlantic Water ships to all 50 states. We are an online-only national ecommerce business. We do not install in any geography. Free pre-purchase consultation, free water test interpretation, free ongoing support, all by phone and email.\u003c\/p\u003e\n","brand":"Mid Atlantic Water","offers":[{"title":"Default Title","offer_id":54082572714268,"sku":null,"price":2395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9523\/4605\/files\/well-water-pfas-system_168616b7-95fc-481e-8db7-e737c340caba.jpg?v=1778182114","url":"https:\/\/midatlanticwater.net\/products\/well-water-pfas-system","provider":"Mid Atlantic Water","version":"1.0","type":"link"}