{"product_id":"c-series-universal-wrench","title":"C-Series Universal Wrench","description":"\u003cp\u003eUniversal wrench for Clack C-Series 1-inch control valves, genuine Clack OEM service tool (part V3193-02 new style) fitting the WS1.25, WS1.5, WS2, WS2H, and WS3 commercial valve drive caps for safe field service of pistons, seals, and brine valves.\u003c\/p\u003e\n\u003ch2\u003eC-Series Universal Wrench, Genuine Clack V3193-02 OEM Service Tool\u003c\/h2\u003e\n\n\u003cp\u003eThe C-Series Universal Wrench is the genuine Clack Corporation OEM service tool (manufacturer part number V3193-02, new style) for safely removing and reinstalling the drive cap on every Clack C-Series 1 inch control valve, including the WS1.25, WS1.5, WS2, WS2H, and WS3. It is the single tool needed to field-service the entire Clack valve, from swapping the piston and seal stack to clearing the brine valve, without damaging plastic threads, crushing the valve body, or requiring a trip back to the manufacturer.\u003c\/p\u003e\n\n\u003ch3\u003eBest For, Not For\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e any homeowner, DIYer, or installer who owns a water treatment system built on a Clack C-Series control valve (WS1.25, WS1.5, WS2, WS2H, or WS3) and wants the OEM tool to service it. This includes residential softeners, iron filters, sulfur and hydrogen sulfide filters, acid neutralizers, carbon filters, and tannin filters. Also the right tool for a plumber or water-treatment professional adding a Clack-capable wrench to the truck.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e Fleck control valves (Fleck 5600, 5600SXT, 7000SXT, 2510, 2510AIO, 2510SXT, 9000, 9100, 9500). Fleck valves use entirely different service tools and this wrench will not fit. Also not the right tool for older Clack WS1 valves built before the C-Series redesign, single-handle whole-house cartridge filter housings (use a filter housing wrench instead), or any non-Clack residential plumbing fitting. If you do not know whether your control valve is a Clack or a Fleck, look for the Clack logo molded into the valve body and the WS-series label on the front of the bypass.\u003c\/p\u003e\n\n\u003ch3\u003eTalk to Aidan Before You Buy\u003c\/h3\u003e\n\n\u003cp\u003eFree expert consultation before you order. Call Aidan at 800-460-5810, seven days a week, 8 AM to 5 PM Eastern. Send a clear photo of the control valve on top of your tank and he will confirm whether it is a Clack C-Series and whether this wrench is the right OEM tool for the job. No upsell, no hard sell, no commission. Mid Atlantic Water is an online-only national ecommerce business shipping to all 50 states; the consultation, sizing, and ongoing service support are all delivered remotely by phone.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Buy the OEM Wrench Instead of Improvising\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps a 1,500 dollar control valve from becoming scrap.\u003c\/strong\u003e The Clack drive cap rides on plastic threads. Channel-locks, pipe wrenches, and strap wrenches crush the cap, strip the threads, or crack the valve body. The C-Series Universal Wrench mates flat to the cap lugs and converts torque into rotation, not crushing force.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne tool services every Clack-equipped system in the house.\u003c\/strong\u003e If you have a softener and an iron filter, both built on a WS1.25 or WS1.5 valve, this single wrench handles both. The same tool services WS2, WS2H, and WS3 valves on larger systems too.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLets you replace pistons, seals, spacer stacks, and the brine valve at home.\u003c\/strong\u003e The entire C-Series valve is field-serviceable. Pop the drive cap with this wrench and the piston, seal, and spacer stack come out as an assembly. The brine valve sits behind the same cap. No special service appointment, no shipping the head back to a dealer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks for routine maintenance, not just repairs.\u003c\/strong\u003e Annual inspection, lubricating the piston seals, clearing iron buildup, swapping a worn injector, or rebuilding after media replacement. Every Clack service procedure starts by pulling the drive cap with this wrench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Clack OEM, not an aftermarket clone.\u003c\/strong\u003e Aftermarket spanner wrenches are made of softer plastic and round off the cap lugs after a few uses. The Clack OEM wrench is the same tool authorized service techs use, built to the original Clack spec, with the proper lug geometry and grip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo electricity, batteries, or air required.\u003c\/strong\u003e Manual hand tool. Lives in a drawer for years until needed, then works exactly as designed the first time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePays for itself the first time you use it.\u003c\/strong\u003e A service call to pull a Clack drive cap typically runs 150 to 300 dollars before any parts or labor on the actual fix. This wrench is a one-time 29.99 dollar purchase that lasts the life of the system.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eWhat This Wrench Lets You Do\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eRemove the drive cap to access and rebuild the piston, seal stack, and spacer assembly\u003c\/li\u003e\n\u003cli\u003eService or replace the brine valve assembly (softeners only)\u003c\/li\u003e\n\u003cli\u003eSwap the injector and injector cap during regeneration troubleshooting\u003c\/li\u003e\n\u003cli\u003eClear iron staining, calcium scale, or biological buildup inside the valve body\u003c\/li\u003e\n\u003cli\u003ePull the entire control head from the mineral tank for tank-side service or media replacement\u003c\/li\u003e\n\u003cli\u003eReinstall the drive cap to the correct seating without overtightening or cross-threading\u003c\/li\u003e\n\u003cli\u003ePerform the routine annual inspection Clack recommends for residential systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003cp\u003eManufacturer Part Number: Clack V3193-02 (new style)\u003cbr\u003e\nCross Reference: CL-WRENCH, V3193 spanner wrench\u003cbr\u003e\nTool Type: OEM service spanner wrench\u003cbr\u003e\nCompatible Control Valves: Clack WS1.25, WS1.5, WS2, WS2H, WS3\u003cbr\u003e\nCompatible Equipment: residential and light-commercial water softeners, iron filters, sulfur filters, acid neutralizers, carbon filters, tannin filters\u003cbr\u003e\nConstruction: heavy-duty molded composite, single-piece spanner\u003cbr\u003e\nEngagement: mates to the slotted lugs on the C-Series drive cap\u003cbr\u003e\nPower: manual, no electricity or batteries\u003cbr\u003e\nSold As: single wrench, no included accessories\u003cbr\u003e\nGenuine OEM: yes, manufactured by Clack Corporation\u003cbr\u003e\nReplacement Frequency: lifetime service tool\u003cbr\u003e\nRecommended For: DIY-comfortable homeowners and water-treatment installers\u003cbr\u003e\nBrand: Clack Corporation\u003cbr\u003e\nPrice: 29.99 USD\u003c\/p\u003e\n\n\u003ch3\u003eCommon Symptoms That Mean You Need This Wrench\u003c\/h3\u003e\n\n\u003cp\u003eSoftener will not regenerate, softener regenerates but stays in regeneration cycle, iron filter is bypassing iron through to the home, acid neutralizer is not raising pH, hydrogen sulfide smell returning between regenerations, salty water at the tap, control valve leaking from the top of the cap, motor running constantly, valve stuck mid-cycle, error code on the SXT or WS1 display, brine tank not drawing or refilling, slow regeneration cycle. Every one of these is a Clack-valve service procedure that begins with pulling the drive cap.\u003c\/p\u003e\n\n\u003ch3\u003eHow To Use It\u003c\/h3\u003e\n\n\u003cp\u003eBypass the system, depressurize the line, unplug the controller, and disconnect the bypass valve from the control head. Place the wrench flat over the drive cap so the lugs on the cap seat into the matching slots on the wrench. Turn counterclockwise (looking down at the cap) with steady hand pressure, no hammers or cheater bars. The cap unthreads in three to four full turns. Lift the cap straight up; the piston, seal stack, and spacer assembly come up with it as a unit. Reverse the procedure to reinstall, hand-tight only, no tools needed for the final seating.\u003c\/p\u003e\n\n\u003ch3\u003eGenuine Clack OEM Versus Aftermarket Spanner Wrenches\u003c\/h3\u003e\n\n\u003cp\u003eSeveral aftermarket spanner wrenches show up in search results as \"fits Clack WS1\" or \"V3193 compatible.\" They are typically injection-molded in softer plastic, the lug geometry is approximate, and they round off after a handful of uses. The genuine Clack V3193-02 wrench sold here is the same OEM tool Clack ships to authorized service centers. Same composite, same lug spec, same fit. If you only buy this tool once, buy the OEM version.\u003c\/p\u003e\n\n\u003ch3\u003eShipping and Support\u003c\/h3\u003e\n\n\u003cp\u003eMid Atlantic Water ships orders nationwide from our Pennsylvania warehouse, typically same-day on weekdays. The wrench is small, light, and ships in a padded mailer separate from any tank or system order, so you can order it on its own without paying freight rates. Free expert support before and after the sale at 800-460-5810, seven days a week, 8 AM to 5 PM Eastern. We are an online-only national ecommerce business; we do not perform onsite installation or service in any geography. The phone number is staffed by Aidan and the MAW technical team for sizing, troubleshooting, and rebuild guidance for any Clack-equipped system, no matter where the original system was purchased.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this wrench fit a Clack WS1?\u003c\/strong\u003e The original WS1 (pre-C-Series) used a different wrench. The C-Series Universal Wrench V3193-02 is the new-style wrench for the C-Series 1 inch valves WS1.25, WS1.5, WS2, WS2H, and WS3. Most Clack residential softeners and filters sold in the last decade are C-Series. If you are unsure, call 800-460-5810 with a photo of the cap and we will confirm.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill it fit a Fleck 5600SXT or any other Fleck valve?\u003c\/strong\u003e No. Fleck valves are an entirely different design. This is a Clack-specific tool.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need this wrench if my system has not had any problems?\u003c\/strong\u003e Most Clack-equipped systems run for years without service. We recommend keeping this wrench in a drawer near the system anyway, because every Clack service procedure begins with pulling the drive cap and there is no substitute tool that does the job without risking the valve body.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use a strap wrench, channel-locks, or a pipe wrench instead?\u003c\/strong\u003e No. Those tools apply crushing force across the cap circumference and routinely strip the plastic threads or crack the valve body. The OEM wrench engages the cap lugs flat and converts torque into rotation only.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this the same wrench Clack sells through their dealer network?\u003c\/strong\u003e Yes. Same part number (V3193-02), same molded composite, same lug spec. Genuine OEM.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat size valve do I have?\u003c\/strong\u003e Look at the front of the bypass valve, where the inlet and outlet plumbing connect. Clack labels the WS1.25, WS1.5, WS2, WS2H, and WS3 directly on the valve body. The valve type is also stamped on the controller faceplate. If you cannot find a label, send a photo to 800-460-5810 and we will identify it for you.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow long does the wrench last?\u003c\/strong\u003e The OEM Clack wrench is a lifetime tool for residential service. We have customers who have used the same wrench for fifteen-plus years across multiple Clack systems.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and Returns\u003c\/h3\u003e\n\n\u003cp\u003eLike every product Mid Atlantic Water sells, the C-Series Universal Wrench is covered by our standard return policy if it arrives damaged or is the wrong tool for your valve. Phone support at 800-460-5810 is available seven days a week before, during, and after the sale.\u003c\/p\u003e\n","brand":"Clack","offers":[{"title":"Default Title","offer_id":54023098335516,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9523\/4605\/files\/cl-wrench.jpg?v=1775402658","url":"https:\/\/midatlanticwater.net\/products\/c-series-universal-wrench","provider":"Mid Atlantic Water","version":"1.0","type":"link"}