{"product_id":"arsenic-removal-system","title":"Whole House Arsenic Removal System (Salt-Regenerating)","description":"\u003cp\u003eWhole-house arsenic removal system for private well water, 2 cubic feet of arsenic-selective anion exchange resin on a Fleck 5600SXT metered demand valve that regenerates the resin bed automatically with ordinary water softener salt, 12 GPM service flow, sized for all home sizes from 1 to 6 bathrooms.\u003c\/p\u003e\n\u003cdiv class=\"product-description-seo\"\u003e\n\u003ch2\u003eWhole House Arsenic Removal System, Salt-Regenerating, One Size Covers All Homes\u003c\/h2\u003e\n\n\u003cp\u003eA whole-house arsenic removal system built around 2 cubic feet of arsenic-selective anion exchange resin and a Fleck 5600SXT digital metered demand valve. Unlike disposable arsenic media that must be thrown away and replaced when it reaches capacity, the resin in this system regenerates automatically with ordinary water softener salt, the same principle a water softener or nitrate filter uses. The valve meters every gallon and renews the resin bed before it approaches capacity, so the system maintains its arsenic removal performance continuously instead of slowly running down toward a media swap. With 12 GPM of continuous service flow, one size covers all residential installations from a 1 bathroom cottage to a 6 bathroom family home.\u003c\/p\u003e\n\n\u003ch3\u003eBest For \/ Not For\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e private well water tested above 5 parts per billion total arsenic at a certified lab (the EPA Maximum Contaminant Level is 10 ppb; many state health departments recommend treating above 5 ppb, especially with young children in the household), where arsenic is in the arsenate (As V) form, with influent pH between 6.5 and 8.5, iron below 0.3 ppm, and manganese below 0.05 ppm. Best for households of any size, since the metered valve adapts regeneration frequency to actual water use: a small household simply regenerates less often. The right pick for homeowners who want a system that maintains itself with a bag of softener salt instead of scheduled disposable media replacements costing $900 or more per cubic foot.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot for:\u003c\/strong\u003e well water with iron above 0.3 ppm or manganese above 0.05 ppm without an upstream iron filter; iron fouls the resin and shortens its life. Not for water with pH below 6.5 without an upstream \u003ca href=\"https:\/\/midatlanticwater.net\/collections\/acid-neutralizers\"\u003eacid neutralizer\u003c\/a\u003e. Not for arsenite-dominant (trivalent As III) water without an upstream oxidation step; most US well water arsenic is already arsenate, and an \u003ca href=\"https:\/\/midatlanticwater.net\/products\/arsenic-speciation-water-test-kit\"\u003earsenic speciation lab test\u003c\/a\u003e confirms which form you have. Not for installations with no 110-120V outlet or no drain available at the install point; the regeneration cycle needs both. Very high sulfate water deserves a phone call with your lab results before ordering, since sulfate competes with arsenic on anion exchange resin and shortens the run length between regenerations.\u003c\/p\u003e\n\n\u003ch3\u003eTalk to Aidan Before You Buy\u003c\/h3\u003e\n\n\u003cp\u003eFree expert phone consultation before you buy. Call or text Aidan at 800-460-5810, 7 days a week, 8 AM to 5 PM Eastern. Send your certified well water lab test results and Aidan will personally confirm whether this system fits your water chemistry, whether you need iron or pH pre-treatment first, and how to program the regeneration schedule for your arsenic and sulfate levels. No upsell, no hard sell, no commission. Mid Atlantic Water is a national online-only water treatment company shipping to all 50 states; the consultation, sizing, water test interpretation, and post-install support are delivered remotely by phone, text, and email regardless of where you live.\u003c\/p\u003e\n\n\u003ch3\u003eHow Salt-Regenerating Arsenic Removal Works\u003c\/h3\u003e\n\n\u003cp\u003eThe resin bed is a strong-base anion exchange resin selective for arsenate. As water flows through the tank, arsenate ions bind to the resin and chloride ions are released in exchange, the same ion exchange principle a water softener uses for hardness. The Fleck 5600SXT valve meters every gallon of water the household uses. When the programmed capacity is reached, the valve runs an automatic regeneration cycle: brine from the included 18 by 33 inch salt tank flushes the accumulated arsenic off the resin and down the drain, and the bed returns to service fully restored. Regeneration is triggered by actual gallons used, not a fixed timer, so a 2 person household and a 7 person household both get correctly timed regenerations from the same hardware.\u003c\/p\u003e\n\n\u003ch3\u003eRegenerable Resin vs Disposable Arsenic Media\u003c\/h3\u003e\n\n\u003cp\u003eMost whole-house arsenic filters use disposable media: either granular adsorptive media (iron oxide, titanium dioxide, activated alumina) or non-regenerable hybrid resin. Both work, but both are consumables. When the bed reaches capacity the media must be physically removed and replaced, typically every 1 to 5 years at $900 or more per cubic foot, and with adsorptive granular media an exhausted bed can release accumulated arsenic back into the treated water at concentrations higher than the source. A salt-regenerating system takes a different approach: the metered valve renews the resin bed automatically before it approaches capacity, week after week, so the bed never runs to exhaustion in normal operation. The ongoing cost is a bag of water softener salt instead of a scheduled media replacement. The trade-off is honest and simple: this system needs an outlet, a drain line, and salt refills, and in exchange you get continuously restored arsenic removal capacity without disposable media bills.\u003c\/p\u003e\n\n\u003ch3\u003eTreatment Order for Wells with Iron and Arsenic\u003c\/h3\u003e\n\n\u003cp\u003eIf your well water has both iron and arsenic, the install order is fixed: \u003ca href=\"https:\/\/midatlanticwater.net\/products\/iron-removal-filter-fleck-2510aio-2-5-cubic-foot-13-54-with-katalox-light\"\u003eiron filter\u003c\/a\u003e first, then water softener if hardness is elevated, then the arsenic system last. The water reaching the arsenic resin must be effectively iron-free (under 0.3 ppm) because residual iron coats the resin beads and blocks arsenic exchange sites. A \u003ca href=\"https:\/\/midatlanticwater.net\/products\/20-inch-big-blue-sediment-filter-kit\"\u003esediment pre-filter\u003c\/a\u003e ahead of the system protects the resin from particulates on any well installation. Aidan walks customers through this sequencing on every consultation call.\u003c\/p\u003e\n\n\u003ch3\u003eNumbered Features\u003c\/h3\u003e\n\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces arsenate (As V) below the EPA Maximum Contaminant Level of 10 parts per billion\u003c\/strong\u003e using 2 cubic feet of arsenic-selective strong-base anion exchange resin, verified by annual treated-water lab testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSalt-regenerating resin bed that renews itself automatically.\u003c\/strong\u003e No disposable media swaps, no $900-plus per cubic foot replacement bills every few years. The ongoing consumable is ordinary water softener salt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFleck 5600SXT digital metered demand valve (Pentair)\u003c\/strong\u003e, the most widely installed residential control valve in America. Regenerates on gallons actually used, never on a blind timer. Large backlit display, 48-hour capacitor preserves settings through power outages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne size covers all homes.\u003c\/strong\u003e 12 GPM continuous service flow handles 1 to 6 bathrooms. Smaller households simply regenerate less often; the metered valve adapts automatically.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 inch by 52 inch Vortech mineral tank\u003c\/strong\u003e with 10-year structural warranty, plus an 18 by 33 inch brine tank with safety float overflow shutoff (about 250 pounds of salt capacity).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 inch stainless steel bypass valve pre-installed\u003c\/strong\u003e, 1 inch threaded inlet and outlet fit standard residential plumbing. NSF\/ANSI 61 certified components, assembled in the USA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree expert phone consultation included.\u003c\/strong\u003e Call or text Aidan at 800-460-5810, 7 days a week, for sizing, water test interpretation, regeneration programming, and ongoing remote support, delivered nationally to all 50 states.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003cp\u003eSystem Type: Whole-house salt-regenerating arsenic removal system, single tank, metered demand regeneration\u003cbr\u003e\nMedia Type: Arsenic-selective strong-base anion exchange resin, chloride form, salt-regenerable\u003cbr\u003e\nMedia Volume: 2.0 cubic feet\u003cbr\u003e\nMineral Tank: 12 inch diameter by 52 inch height Vortech mineral tank, gravel-free internal distributor\u003cbr\u003e\nBrine Tank: 18 inch by 33 inch square brine tank with safety float overflow shutoff, approximately 250 pounds salt capacity\u003cbr\u003e\nControl Valve: Fleck 5600SXT digital metered demand-initiated regeneration head (Pentair)\u003cbr\u003e\nRegeneration Trigger: Gallons-used metered demand, programmed to your water chemistry so the bed regenerates before approaching capacity\u003cbr\u003e\nRegenerant: Ordinary water softener salt (sodium chloride)\u003cbr\u003e\nService Flow Rate: approximately 12 GPM continuous, sized for 1 to 6 bathrooms\u003cbr\u003e\nConnection Size: 1 inch threaded inlet and outlet\u003cbr\u003e\nBypass Valve: 1 inch stainless steel bypass valve, pre-installed on the control head\u003cbr\u003e\nDrain Connection: 1\/2 inch on the control valve, plus brine line to brine tank\u003cbr\u003e\nPower Required: standard 110-120V grounded outlet, 48-hour internal capacitor preserves settings during outages\u003cbr\u003e\nArsenic Reduction: Removes arsenate (As V) below the EPA MCL of 0.010 mg\/L (10 ppb) under recommended operating conditions, verified by annual treated-water testing\u003cbr\u003e\nRequired Upstream Conditions: Influent pH between 6.5 and 8.5, iron below 0.3 ppm, manganese below 0.05 ppm; elevated sulfate shortens run length between regenerations and should be reviewed with your lab results before ordering\u003cbr\u003e\nArsenite (As III) Note: Trivalent arsenite must be pre-oxidized to arsenate (As V) for removal. Most US well water arsenic is already arsenate; a speciation lab test confirms\u003cbr\u003e\nOperating Pressure Range: 20 to 100 psi\u003cbr\u003e\nOperating Temperature Range: 40 to 100 degrees Fahrenheit\u003cbr\u003e\nResin Life: Many years of service under correct operating conditions, since regeneration continuously restores capacity; annual treated-water testing verifies performance\u003cbr\u003e\nCertification: NSF\/ANSI 61 certified components\u003cbr\u003e\nTank Warranty: 10 years on the Vortech mineral tank\u003cbr\u003e\nValve Warranty: 5 years on the Fleck 5600SXT control valve (Pentair)\u003cbr\u003e\nInstallation Position: Whole-house, installed downstream of any sediment pre-filter, iron filter, acid neutralizer, and water softener, upstream of the cold water service into the home\u003cbr\u003e\nManufacturer: Mid Atlantic Water, assembled in the USA using a Pentair Fleck 5600SXT valve, Vortech mineral tank, and arsenic-selective anion exchange resin\u003cbr\u003e\nShipping: Free shipping to all lower 48 states, ships pre-loaded with resin\u003c\/p\u003e\n\n\u003ch3\u003eCommon Contaminants Treated\u003c\/h3\u003e\n\n\u003cp\u003eArsenate (As V), pentavalent arsenic, the predominant form of arsenic in oxygenated groundwater across most of the United States. After upstream oxidation, also treats water where arsenite (As III) has been converted to arsenate. Reduces total dissolved arsenic below the EPA Maximum Contaminant Level of 0.010 mg\/L (10 parts per billion) under the recommended operating conditions. Does not remove iron, manganese, hardness, hydrogen sulfide (rotten egg smell), chlorine, sediment, bacteria, viruses, lead, copper, mercury, nitrate, fluoride, or volatile organic compounds; pair with the appropriate dedicated treatment if any of those are present in your well water.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation Overview\u003c\/h3\u003e\n\n\u003cp\u003ePlumbed inline on the cold water service entering the home, downstream of the well pressure tank and downstream of any sediment filter, iron filter, or water softener. The 1 inch connections on the stainless bypass fit standard residential plumbing. The install point needs a standard 110-120V outlet for the valve and a 1\/2 inch drain line to a floor drain, utility sink, sump, or condensate pump for the regeneration cycle. The system arrives pre-loaded with 2 cubic feet of resin; set the brine tank beside the mineral tank, connect the brine line, add salt, and program the valve. Installation takes 1 to 2 hours for a homeowner with basic plumbing skills, or any local plumber can handle it. Aidan programs the regeneration settings with you over the phone based on your lab results.\u003c\/p\u003e\n\n\u003ch3\u003eWater Testing and Ongoing Verification\u003c\/h3\u003e\n\n\u003cp\u003eArsenic is invisible, tasteless, and odorless, so the only way to know what your well water contains is a certified lab test. Test the raw well water before purchase to confirm arsenic concentration and form, and to check the upstream conditions (pH, iron, manganese, sulfate). Then test the treated water annually after install to verify performance. Because the resin bed regenerates automatically, there is no scheduled media replacement to track; the annual lab test is the verification step, and Aidan reads the results with you at no charge.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty and Ongoing Support\u003c\/h3\u003e\n\n\u003cp\u003e10 years on the Vortech mineral tank, 5 years on the Fleck 5600SXT control valve, and lifetime free phone and text support from Aidan at 800-460-5810, 7 days a week, for installation questions, water test interpretation, regeneration programming, and troubleshooting. Mid Atlantic Water is an online-only national water treatment company shipping to all 50 states; consultation and ongoing support are delivered remotely.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Mid Atlantic Water","offers":[{"title":"Default Title","offer_id":54483795673372,"sku":"MT56\/16MB-64B--SXTV BLACK TANKS| F250 | ARSENIC RESIN","price":3795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/9523\/4605\/files\/fleck-5600sxt-softener_2463c2a4-795e-4b44-b370-e32fa91804fd.jpg?v=1788102884","url":"https:\/\/midatlanticwater.net\/products\/arsenic-removal-system","provider":"Mid Atlantic Water","version":"1.0","type":"link"}